Gasfitter - Class B
Gasfitter
Class B
31-44
- How to measure and mark reference points for gas installations
- How to install and maintain gas meters, regulators and lines
- How to install, maintain and service gas heating units and their components
- How to repair and service gas appliances and related equipment
- How to test for and deal with gas leaks
Gasfitters are careful people who enjoy a physical workplace and function well under pressure. They are very precise, as they oversee the gas systems that heat and power our homes and businesses.
As a Gasfitter – Class B, you’ll use your strong math skills and thorough approach to install, repair and maintain propane and natural gas products found in homes and buildings with safety as top of mind.
You may find yourself inside a building or outside, working on a range of tasks that ensure the proper use of gas.
20.00
2.00
Training Hours
3000
False
Note: SkilledTradesBC is responsible for administering the apprenticeship for Gasfitter – Class A Certificate of Qualification and Red Seal Endorsement. Technical Safety BC is responsible for regulating the Gasfitter – Class A Certificate of Qualification (license). Please refer to the Technical Safety BC web site for information on the Certificate of Qualification examination requirements.
Skilled Trades Certification Updates
As an interim measure, SkilledTradesBC will recognize holders of Gasfitter Class A and Class B Certificate of Qualification issued by Technical Safety BC as being compliant with Skilled Trades Certification beginning December 1, 2023, and there is no further action required at this time.
We also continue to recognize Gasfitter Class A and Class B Certificate of Qualification or Apprenticeship issued by SkilledTradesBC or another Canadian jurisdiction, as well as Interprovincial Red Seal Certification in Gasfitter Class A and Class B.
If you have any questions about the Skilled Trades Certification requirements, please complete this Contact form and our Advisors will get in touch with you to assist you further.
Program Updates
April 2022: Transition Update (Year 4) All levels of the current (pre-2019) program have been phased out. Apprentices who completed Level 1 before 2019 are asked to contact their Apprenticeship Advisor before registering for Level 2.
September 2018: Transition Plan (revised April 2022)
March 2018: OPSN 2018 002.1 Program Changes
Program Information
and Resources
Program Information
and Resources
Standard Level Exams
Program Update Level 1 SLE Code Book Compliance
OPSN 2019 022 Level 1 SLE launch
- Monitoring and quality control
- Operation of power tools and equipment
- Fuel systems and gas equipment
- Venting and air supply
- Controls and safeguards
Certification challenge only trade
1
To get certified, you will need to sign up for technical training at an approved training provider in addition to on-the-job training.
Visit Trades Training BC and EducationPlannerBC for a comprehensive list of what programs are available in your trade at public and non-public schools.
For a list of all approved non-public training providers, visit this page.
Gasfitter - Class A
Gasfitter
Class A
31-44
- How to measure and mark reference points for gas installations
- How to install, maintain and service fuel systems
- How to install, maintain and service venting and air supply systems
- How to install and service gas equipment
- How to install and service controls and safeguards
Gasfitters are careful people who enjoy a physical workplace and function well under pressure. They are very precise, as they oversee the gas systems that heat and power our homes and businesses.
As a Gasfitter - Class A, you’ll enjoy a hands-on, atmosphere where you work to install, service and maintain gas lines, appliances and equipment in a range of settings. Using your knack for precision and math, you’ll know the details around fuel, venting, and air supply systems. It’s a challenging and rewarding role, as your work directly impacts the safe use of gas in home and buildings.
20.00
2.00
Training Hours
3000
False
Note: SkilledTradesBC is responsible for administering the apprenticeship for Gasfitter – Class A Certificate of Qualification and Red Seal Endorsement. Technical Safety BC is responsible for regulating the Gasfitter – Class A Certificate of Qualification (license). Please refer to the Technical Safety BC web site for information on the Certificate of Qualification examination requirements.
Skilled Trades Certification Updates
As an interim measure, SkilledTradesBC will recognize holders of Gasfitter Class A and Class B Certificate of Qualification issued by Technical Safety BC as being compliant with Skilled Trades Certification beginning December 1, 2023, and there is no further action required at this time.
We also continue to recognize Gasfitter Class A and Class B Certificate of Qualification or Apprenticeship issued by SkilledTradesBC or another Canadian jurisdiction, as well as Interprovincial Red Seal Certification in Gasfitter Class A and Class B.
If you have any questions about the Skilled Trades Certification requirements, please complete this Contact form and our Advisors will get in touch with you to assist you further.
Program Updates
Level 2 Technical Training of the Red Seal Gasfitter - Class A program will be implemented on January 1, 2024.
The Red Seal Gasfitter - Class A program will be implemented on January 1, 2023. Please see OPSN 2022 023 for details.
November 2020: Gasfitter - Class A will be designated as a Red Seal trade in BC as of April 1, 2021. The new Program Outline and Program Profile for this Red Seal Program are posted below. Please see OPSN 2020 010 for details.
New Red Seal Program
Information
New Red Seal Program
Information
Implementation Date: January 1, 2023
Exam Information
and Resources
Find exam-related information and resources under each menu item below.
Updates:
March 2024: OPSN 2024 008 (Level 1 SLE Launch)
Information:
- Exam Breakdown
- Acronyms
- Formulas
- Code Book required:
- CSA B149.1:20
- CSA B149.3:20
Updates:
April 2023: Program Update (IP Exams aligned to 2014 Gasfitter - Class A NOA)
Information:
Red Seal Exam Breakdown (pdf)
Code Book provided: B149.1 Natural Gas and Propane Installation Code; B149.2 Propane Storage and Handling Code; B149.3 Code for the field approval of fuel-burning appliances and equipment
Challenge the
trade
Challenge the
trade
If you have significant work experience in a trade but have never been certified in Canada, you may apply to challenge the certification. Learn more about How to Challenge a Skilled Trade.
OR
If you sponsor apprentices but have never been certified in Canada, you may request to supervise and sign-off apprentices when they are ready to be certified. Please refer to the application form on whether this trade qualifies.
Instructions
Personal information and exams scheduling information (for challenge option)
Online Application
Sign up for the Portal to start your application.
Employer Declaration
Document of relevant work experience
Statutory Declaration
Attestation for self-employment/work experience when employer cannot be contacted
- Monitoring and quality control
- Operation of power tools and equipment
- Fuel systems and gas equipment
- Venting and air supply
- Controls and safeguards
Certification challenge only trade
1
To get certified, you will need to sign up for technical training at an approved training provider in addition to on-the-job training.
Visit Trades Training BC and EducationPlannerBC for a comprehensive list of what programs are available in your trade at public and non-public schools.
Climbing Arborist
Climbing
Arborist
17-30
- How to assess trees and shrubs for risks
- How to do aerial work with a lift truck and climbing equipment
- How to conduct tree climbing and pruning at heights
- How to identify and remediate issues for trees
- How to identify common tree health disorders
Climbing Arborists take to the air, caring for the trees that surround us. They enjoy the challenge of working outdoors, while displaying their caring nature in the way they maintain our green spaces.
As a Climbing Arborist, you’ll spend your days up in the trees, letting your curious and nimble nature help you navigate a challenging and invigorating environment.
You don’t shy away from diverse weather conditions, and you’re great at guiding your work through visual assessments. You’ll assess trees for health risks, either using climbing equipment or vehicles to safety carry out your tasks.
8.00
1.00
Training Hours
1800
False
Program Updates
Individuals applying for a Sign-off Authority number for Climbing Arborist do not require Arborist Technician certification. Updated forms are posted below in the Challenge the Trade section.
The Exam Breakdown is available for the Certificate of Qualification and show the approximate percentage of weighting per General Area of Competency (GAC).
The apprenticeship pathway for Climbing Arborist is now available for registration. Both the apprenticeship and challenge pathway requires the candidate to demonstrate competency in a practical assessment in addition to a written exam. See Occupational Performance Standards for an overview of the competencies that are assessed.
Program
information
Program
information
Note: Arborist Technician must be taken before Climbing Arborist.
Challenge the
Trade
Challenge the
Trade
If you have significant work experience in a trade but have never been certified in Canada, you may apply to challenge the certification. Learn more about How to Challenge a Skilled Trade.
OR
If you sponsor apprentices but have never been certified in Canada, you may request to supervise and sign-off apprentices when they are ready to be certified. Please refer to the application form on whether this trade qualifies.
Instructions
How to Apply
Application Form
Personal information and exams scheduling information (for challenge option)
Employer Declaration
Document of relevant work experience
Statutory Declaration
Attestation for self-employment/work experience when employer cannot be contacted
- Active listening
- Plant and tree identification
- Plant and tree treatment
- Falling, limbing, pruning and bucking
- Climbing equipment use
Certification challenge only trade
1
To get certified, you will need to sign up for technical training at an approved training provider in addition to on-the-job training.
Visit Trades Training BC and EducationPlannerBC for a comprehensive list of what programs are available in your trade at public and non-public schools.
Arborist Technician
Arborist
Technician
17-30
- How to identify different types of plants and trees
- How to treat injured and diseased plants and trees
- How to fall, limb and buck trees
- How to prune and perform other work on trees from the ground
- How to chip brush, cut wood and clean up after tree care operations
Arborist Technicians are adventurous and curious individuals, whose deep appreciation for trees, love of physical activity, and visual way of working create the beautiful communities we all enjoy.
As an Arborist Technician, you’re skilled in all aspects of tree care, including identifying plants and examining and diagnosing pests and diseases.
You enjoy working in an outdoor setting, and have an approach that spurs you to interact with your surroundings. You use your knowledge to assess the health and structure of a tree, determine its needs and identify appropriate treatments.
8.00
1.00
Training Hours
1600
False
Program Information
AND RESOURCES
Program Information
AND RESOURCES
Note: Arborist Technician must be taken before Climbing Arborist.
Exam Information
AND RESOURCES
Challenge the
Trade
Challenge the
Trade
If you have significant work experience in a trade but have never been certified in Canada, you may apply to challenge the certification. Learn more about How to Challenge a Skilled Trade.
OR
If you sponsor apprentices but have never been certified in Canada, you may request to supervise and sign-off apprentices when they are ready to be certified. Please refer to the application form on whether this trade qualifies.
Instructions
How to Apply
Application Form
Personal information and exams scheduling information (for challenge option)
Employer Declaration
Document of relevant work experience
Statutory Declaration
Attestation for self-employment/work experience when employer cannot be contacted
- Active listening
- Plant and tree identification
- Plant and tree treatment
- Falling, limbing and bucking
- Pruning and other groundwork
Certification challenge only trade
1
To get certified, you will need to sign up for technical training at an approved training provider in addition to on-the-job training.
Visit Trades Training BC and EducationPlannerBC for a comprehensive list of what programs are available in your trade at public and non-public schools.
Utility Arborist
Utility
Arborist
21-35
- How to identify and apply regulations
- How to use aerial lifts, chippers, and chainsaws
- How to assess, identify and prune trees
- How to fall and buck
- How to use rigging and climbing gear
Utility Arborists step in and clear vegetation from electrical equipment and structures, ensuring the continued and safe flow of power to our homes and communities.
As a Utility Arborist, you’ll find the balance between physical, adventurous and nimble work with the need to be extra careful.
You’ll clear trees and plants away from electrical equipment, including power lines, whether because of natural growth or storms. Your work will require a solid grounding in the use of arborist equipment and an excellent understanding of safety regulations.
8.00
2.00
Training Hours
2378
False
Program Updates
None.
Program Information
and resources
Program Information
and resources
Exam Information
And Resources
Find exam-related information and resources under each menu item below.
Information:
Information:
Challenge the
Trade
Challenge the
Trade
If you have significant work experience in a trade but have never been certified in Canada, you may apply to challenge the certification. Learn more about How to Challenge a Skilled Trade.
OR
If you sponsor apprentices but have never been certified in Canada, you may request to supervise and sign-off apprentices when they are ready to be certified. Please refer to the application form on whether this trade qualifies.
Instructions
How to apply
Application Form
Personal information and exams scheduling information (for challenge option)
Employer Declaration
Document of relevant work experience
Statutory Declaration
Attestation for self-employment/work experience when employer cannot be contacted
- Coordination
- Critical thinking
- Equipment operation
- Tree and plant pruning, falling, and limbing
- Site inspections
Certification challenge only trade
1
To get certified, you will need to sign up for technical training at an approved training provider in addition to on-the-job training.
Visit Trades Training BC and EducationPlannerBC for a comprehensive list of what programs are available in your trade at public and non-public schools.
For a list of all approved non-public training providers, visit this page.
Proximity Verification Form
Plumber
Plumber
19-40
- How to read and interpret blueprints, drawings and project specifications
- How to install, repair and maintain plumbing fixtures and systems
- How to install specialized systems
- How to select, measure, shape and join pipes
- How to locate, prevent, repair and test pipes for leaks
Plumbers take great satisfaction creating, and fixing complex systems. Their logical approach is fit for a career centered around installing and repairing the essential plumbing we depend on.
As a Plumber, you’ll constantly test your troubleshooting skills, demonstrating a persistent and agile approach to work as you think ahead while fixing, installing, and reviewing complex systems and appliances.
You enjoy challenging and time-sensitive tasks, not to mention working in a key role that upholds high safety standards and ensures we protect the essential water systems around us.
30.00
4.00
Training Hours
6300
True
Program Updates
April 2024: Transition Update (Year 6)
April 2023: Transition Update (Year 5)
March 2021: Transition Update (Year 3)
September 2018: Transition Plan
Harmonization Progress
Level 1 - Harmonized*
Level 2 - Harmonized*
Level 3 - Harmonized*
Level 4 - Harmonized*
*Harmonized = Program stream with re-aligned content beginning in April 2019
If you are unclear as to what program you are registered in, or unclear as to which program you should be following, please Contact Us.
Harmonized Program
information & Resources
Harmonized Program
information & Resources
In effect starting April 2019, as per Transition Plan
Exam Information
AND RESOURCES
Find exam-related information and resources under each menu item below.
Updates:
- October 2019: OPSN 2019 015 (Harmonized Level 1 SLE Launch)
Information:
- Exam Breakdown
- Code Book required: none
Updates:
- October 2022: OPSN 2022 025 (Harmonized Level 2 SLE Code Book Update)
- February 2022: OPSN 2022 003 (Harmonized Level 2 SLE Launch)
Information:
- Exam Breakdown
- Acronyms
- Code Book required: National Plumbing Code 2015 or 2020
Updates:
- April 2024: OPSN 2024 011 (Harmonized Level 3 SLE Launch)
Information:
- Exam Breakdown
- Acronyms (to be posted soon)
- Code Books required:
- One version of each of the following two code books will be required:
- National Plumbing Code of Canada (NPC) 2015 or 2020
- CSA B149.1:15 or CSA B149.1:20
- One version of each of the following two code books will be required:
Updates:
- December 2023: Program Update (IP Exams aligned to 2023 Red Seal Occupational Standards (RSOS)). A Comparative Anlaysis detailing changes between the 2016 RSOS and 2023 RSOS can be found here.
Information:
- Red Seal Occupational Standard
- Red Seal Exam Preparation Guide
- Red Seal Exam Breakdown (online)
- Red Seal Exam Breakdown (pdf)
- Red Seal Exam Formulas (pdf)
- Red Seal Exam Acronyms (pdf)
- Code provided: National Plumbing Code 2020 (code book will be provided to each candidate)
Program Information
Program Information
Information for the Current (pre-harmonized) program.
Challenge the
Trade
Challenge the
Trade
If you have significant work experience in a trade but have never been certified in Canada, you may apply to challenge the certification. Learn more about How to Challenge a Skilled Trade.
OR
If you sponsor apprentices but have never been certified in Canada, you may request to supervise and sign-off apprentices when they are ready to be certified. Please refer to the application form on whether this trade qualifies.
Instructions
How to apply to challenge this trade.
Application Form
Personal information and exams scheduling information (for challenge option)
Employer Declaration
Document of relevant work experience
Statutory Declaration
Attestation for self-employment/work experience when employer cannot be contacted
- Critical thinking
- Monitoring
- Quality control
- Plumbing components preparation and assembly
- Plumbing systems installation
Certification challenge only trade
1
To get certified, you will need to sign up for technical training at an approved training provider in addition to on-the-job training.
Visit Trades Training BC and EducationPlannerBC for a comprehensive list of what programs are available in your trade at public and non-public schools.
For a list of all approved non-public training providers, visit this page.